Leakage Current Clampmeter With Data Logging Function & PC Interface

 Leakage Current Clampmeter


Technical Specifications
Sensing : Average sensing
Jaw Opening Size : 40mm
Function :
Measurement of AC leakage current,
AC Current upto 300A & On-line
Display Size : 32mm x 15mm
Test Mode : Clip-on CT, Integral mode.
Display Mode : Four Digit LCD display.
LCD Dimension : 35mm x 21.5mm
Sampling Rate : About 2times/s
Range : 0.00mA ~300.0A
Frequency : 50 / 60Hz; Automatically
Resolution : 10 µA
Line voltage : Line test under AC600V
Data Hold : Display shows “DH” symbol.
Out of Range : Display shows “OL” symbol.
Data Storage : 99 groups, all used when display “FULL”
Power Consumption : about 5mW

• Peak Hold : Push “HOLD” without release, the meter will show the peak value during the pushing period.
Battery Voltage : " " indicating the battery voltage is lower then 7.2V. Then the battery have to be changed.
Operating Temperature and Humidity : 0 °C ~ 40 °C : below 80% R.H.
Storage Temperature and Humidity : -10 °C ~ 60 °C : below 70% R.H.
Insulation Strength : AC 2kV/rms (between the alloy of the clamp & housing)
Auto Power Off : 5 minutes after power on, it will power off automatically to lower the power consumption.
RS 232 Interface : Data store in the memory of the meter via RS232 upload to PC, or on-line monitoring.
Power : Standard 9V battery.
Dimension : 175(W) x 70(H) x 38(T)mm
Weight : Approx. 120g (with battery)

  Manual Online       View Catalog        Send Enquiry