50000/500,000 COUNTS HAND HELD TRMS DIGITAL MULTIMETER WITH PC INTERFACE

KM-859CF

Model KM 859CF (14 functions 43 ranges)
Special Feautres :
• Record Max, MIN, MAX-MIN readings.
• Crest (Instantaneous Pead Hold) MAX, MIN, MAX-MIN readings.
• Relative zero mode.
• 500,000 counts high resolution stable reading mode. Backlighted display
• dBm readings.
• T1-T2 differential temperature reading s
• %4-20 mA loop current readings.
• High noise rejection filtered Line Level Frequency mode
• Line Level Frequency mode with 4 Trigger Levels.
• HBC Fuse Protection

Feautres :
• DC Voltage Basic Accuracy 0.02%
• Fully Autoranging
• Backlighted display.
• T1-T2 differential Temperature readings.
• Fast Data Measurement 5/sec
• Data Hold, Diode Test & Duty Cycle
• Audible & Visible input warning.
• Auto Power Off .

General Specifications
Sensing : AC, AC + DC True RMS;
  Frequency Bandwidth 100kHz (V) & 10kHz (A)
Display :
  4-4/5 digits 50,000 counts. Selectable stable mode
  5-4/5 digits 500,000 counts for DC voltage,
  6 digits 999,999 counts for Hz
Polarity : Automatic
Update Rate :
  4-4/5 digits fast mode : 5 per second nominal;
  5-4/5 digits stable mode : 1.25 per second nominal;
  42 Segments Bar graph : 60 per second max.
Low Battery : Below approx. 7V
Operating Temperature : -20°C to 60°C
Relative Humidity : Maximum 90% R.H. For Temperature upto 31°C decreasing linearly to 50% R.H. at 60 °C
Pollution Degree : 2
Storage Temperature : -20°C to 60°C, < 80% R.H. (With battery removed)
Altitude : Operating below 2000m
Temperature : Nominal 0.1 x (specified accuracy) / °C @ (0°C - 18°C or 28°C - 40°C), or otherwise specified.
Power Supply : Single Alkaline 9V battery.
Power Consumption : 5mA typical
APO timing : Idle for 4.5 minutes
APO Consumption : 20µA
Dimension :
  186(L) mm x 87(W) mm x 35.5(H) mm;
  198(L) mm x 97(W) mm x 55(H) mm with Holster
Weight : 390 gm, 500 gm with Holster
  Manual Online   View Catalog   Send Enquiry