| Operating Temperature |
: |
10OC ~ 50OC < 80% R.H. |
| Storage Temperature |
: |
-20OC ~ 60OC < 80% R.H. (With Battery removed) |
| Sensing |
: |
Average sensing . |
| Pollution Degree |
: |
2 |
| In an RF Field of 3V/m |
: |
Capacitance function is not specified |
| Other function ranges |
: |
Total accuracy = Specified accuracy + 45d
Performance above 3V/m is not specified |
| Safety |
: |
The meter is protected, against the users, by double insulation per EN61010-1, IEC61010-1 2nd Ed., UL61010-1 2nd Ed. & CAN/CSA C22.2 No.61010.1-0 to “CAT III 1000V & CAT IV 600V”. Terminals (to COM) ratings.
V : Category III 1000 Volts AC & DC,
and CAT IV 600 Volts AC & DC
A : CAT IV 600V AC & 500VDC, O/L Protection.
V : 1050V rms, 450V rms.
A : 15A/600V, IR 100KA, F fuse &
Others : 600VDC/VAC rms |
| Low Battery |
: |
Below approx. 5.5V |
| Power Supply |
: |
Standard 9V battery. |
| Power Consumption (typical) |
: |
3µA for a function |
| APO Consumption(typical) |
: |
20µA typical except 50µA. |
| APO Timing |
: |
IDLE approx. > 30 minutes |
| Dimension |
: |
173(L) x 83(W) x 48.5(H)mm |
| Weight |
: |
Approx. 300gm. |
| Accessories |
: |
Battery installed, Test lead pair, Manual & Carrying case. |
F
Back